Andover Audio SpinBase Support Articles
Here are some things to try when troubleshooting the SpinBase. If you still experience a problem, please let us know. Identifying unwanted noise or volume issues. 1. Disconnect the turntable or any other inputs. Is the noise still there?. 2. Connect
The SpinBase has 2 sets of Stereo inputs. You can connect a turntable to the PreAmp inputs and a CD player or other device to the Line Inputs. The SpinBase will also receive Bluetooth. There is no input selector on the SpinBase. So you could potent
In the first models of the SpinBase, shortening plugs were provided to help reduce hum when using a turntable. They plugged into the open Line inputs. Any newer SpinBase model (post Jan 2021 with a Subwoofer Output) does not need these. You should no
A very common concern and criticism we get is "How can you do that? The audio from the speaker will feedback into the turntable!! This is so basic!! I'm and audio expert! And what about the vibrations!! Oh no!!". We know. Thank you. That is why we'v
The 1/8" (3.5mm) Stereo Line Out/Sub-Out on the SpinBase is the same as a headphone output. It is a stereo connection that you can connect to the Subwoofer.
The ceramic switch on the back of the SpinBase applies equalization. If you have a ceramic stylus, the equalization will offer a better sound for you. If you have a magnetic stylus, which offers better sound quality, you should leave this switch in
There are separate Left and Right speakers. Two speakers are on the sides of the cabinet and two are on the front for a very wide dispersion that is a respectable simulation to what you will achieve with separate speakers. According to Michael Fremer
The SpinBase does not transmit Bluetooth., You'll need to purchase a Bluetooth transmitter and plug it into the headphone output of the SpinBase. Google "airpods bluetooth transmitter" and you'lll see a bunch of options.
Weight 18 lbs,. It can probably support 20 lbs. just fine, but we haven't tested this extensively.
Most moving coil cartridges are very low output and require a step-up transformer. There are a precious few high-output moving coils, but they are few and far between. The Sumiko Blue Point Special EVOIII just happens to be one of them
The first-generation SpinBase models have an 1/8 output on the back with a picture of headphones. The second-generation models have another 1/8 output labeled Line-Out/Sub Out. You most likely have this if you purchased a SpinBase after 1/1/21. We di